APISPEC5CT
石油油管螺紋最新標準是APISPEC5CT,其中包括了多種螺紋類型,如STC、LTC、BTC等,這些螺紋類型都有其特定的尺寸和形狀,以適應不同的應用場景
此外,APISPEC5CT還規定了油管的材質、制造工藝、質量控制等方面的要求,以確保油管的質量和安全性能
中國石油油管螺紋是30度的.
石油裂化用無縫鋼管(GB9948-88)是適用于石油精煉廠的爐管、熱交換器和管道無縫鋼管。
石油鉆探管(YB528-65)是用于石油鉆探兩端內加厚或外加厚的無縫鋼管。鋼管分車絲和不車絲兩種,車絲管用接頭聯結,不車絲管用對焊的方法與工具接頭聯結。
螺紋標準較多,你必須與圖紙提供者確認,你將要加工的零件采用的是采用了哪個標準。
下面是美國石油管螺紋標準:
外徑 牙數/吋 螺距(P,毫米) 牙型高H(毫米)
33.4 11.5 2.209 1.913
60.3 11.5 2.209 1.913
現行的國家標準
序號 代號 名稱 實施情況
1 GB/T9253.2-1999 石油天然氣工業套管、油管和管線管螺紋的加工、測量和檢驗 Petroleum andnatural gas instries-hreading,gauging,and threadinspection of casing,tubing and line pipe threads
1999-12-01實施,代替GB/T 9253.2-1988,GB/T 9253.3-1988,GB/T 9253.4-1988,GB/T9253.5-1988,GB/T 9253.6-1988,GB/T 9253.7-1988
2 GB/T7306.1-200055°密封管螺紋第1部分:圓柱內螺紋與圓錐外螺紋Pipe threads with 55 degree thread angle where pressure-tightjoints are made on the threads--Part 1:Parallel internal and taper externalthreads
2000-12-01實施,代替GB/T 7306-1987
3 GB/T7306.2-200055°密封管螺紋第2部分:圓錐內螺紋與圓錐外螺紋 Pipe threads with 55 degree thread angle where pressure-tightjoints are made on the threads--Part 2:Taper internal and external threads 2000-12-01實施,代替GB/T 7306-1987
4 GB/T7307-2001 55°非密封管螺紋 Pipe threads with 55 degree thread angle where pressure-tightjoints are not made on the threads 2001-09-01實施,代替GB/T 7307-1987
5 GB/T18052-2000 套管、油管和管線管螺紋的測量和檢驗方法 Gauging and inspection ofcasing, tubing andline pipe threads 2000-10-01實施
6 GB/T10922-2006 55°非密封管螺紋量規 Gauges for pipe threads with 55 degree thread angle wherepressure-tight joints are not made on the threads 2006-08-01實施,代替GB/T 10922-1989
7 GB/T20324-2006 G系列圓柱管螺紋圓板牙 Circular dies for parallelpipe threads - G series 2007-01-01實施
8 GB/T20333-2006 圓柱和圓錐管螺紋絲錐的基本尺寸和標志 Taps for parallel andtaper pipe threads General dimensions and marking 2007-01-01實施
9 GB/T20334-2006 G系列和Rp系列管螺紋磨牙絲錐的螺紋尺寸公差 Ground thread taps for pipethreads G series and Rp series - Tolerances on the threaded portion 2007-01-01實施
10 GB/T20328-2006 R系列圓錐管螺紋圓板牙 Circular dies for taper pipe threads - R series 2007-01-01實施
11 GB/T21267-2007 石油天然氣工業套管及油管螺紋連接試驗程序 Petroleum and natural gas instries - Proceres for testingcasing and tubing 買粉絲nnections 2008-06-01實施
12 GB/T22091.1-2008 55°密封管螺紋量規第1部分:用于檢驗圓柱內螺紋與圓錐外螺紋 Gauges for pipe threads with55 degree thread angle where pressure-tight joints are made on the threads -Part 1:Verification of parallel internal and taper external threads 2009-01-01實施
13 GB/T27944-2011 60°干密封管螺紋 Dryseal pipe threads with the thread angle of 60 degrees
14 GB/T12716-2011 60°密封管螺紋 Pipe threads with the thread angle of 60 degrees wherepressure-tight joints are made on threads
石油油套管執行API SPEC 5CT-2011《油管和套管規范》。
石油套管是用于支撐油、氣井井壁的鋼管,以保證鉆井過程進行和完井后整個油井的正常運行。每一口井根據不同的鉆井深度和地質情況,要使用幾層套管。套管下井后要采用水泥固井,它與油管、鉆桿不同,不可以重復使用,屬于一次性消耗材料。所以,套管的消耗量占全部油井管的70%以上。套管按使用情況可分為:導管、表層套管、技術套管和油層套管。
API SPEC 5CT-2011《油管和套管規范》是美國石油學會發布的一個關于石油套管的標準.世界通用.主要用于石油管,油管和套管。
高壓油管接頭型號的字母S\D\L都代表尺寸。
DN是公稱通徑(或叫公稱直徑),就是各種管子與管路附件的通用口徑。同一公稱直徑的管子與管路附件均能相互連接,具有互換性。
尺寸標準標準為歐式法蘭
壓力等級有PN 0.25、0.6、1.0、1.6、2.5、4.0、6.3、10.0、16.0、20.0等10個壓力等級。
公稱直徑:DN15~DN1600mm。
密封面型式有平面、凸面、凹凸面、榫槽面、環連接面 5種。
擴展資料
公稱通徑(nominal diameter),又稱平均外徑(mean outside diameter)。